Dyson V6 For Spares or Repair - Now Gone!

Get rid of your unwanted goods. This section is only for items offered for free.

Moderators: Soner, Dragon, PoshinDevon

Post Reply
User avatar
waddo
Kibkommer
Kibkommer
Posts: 4662
Joined: Sun 13 May 2012 7:21 am

Dyson V6 For Spares or Repair - Now Gone!

  • Quote
  •   Message 1 of 12 in Discussion

Post by waddo »

I have a Dyson V6 FREE for spare or repair. The problem with it is that the battery is no longer accepting a charge. Earlier this year I replaced the old battery and it worked for a couple of weeks then just stopped charging. I have tested the charger and that is working fine, I have even used a different charger but still the battery is not charging. I think that having bought a replacement battery - not an original - that it is the battery that has failed.

The rest of the unit and all it's clip on accessories are all in good working order, although it is an old and well used model it was fine till the battery change.

PM me if you can make use of it for any purpose whatsoever - original batteries are available on eBay - don't buy a non-original one!!!
Last edited by waddo on Sun 08 Jan 2023 12:02 pm, edited 1 time in total.
No matter how hard the past, you can always begin again.

TAC
Kibkommer
Kibkommer
Posts: 226
Joined: Sat 09 Sep 2017 1:24 pm

Re: Dyson V6 For Spares or Repair

  • Quote
  •   Message 2 of 12 in Discussion

Post by TAC »

If you haven't tried this might be worth a go
Check to see if the unit will hold a charge without attachments on it. If it does... the problem is the attachment is clogged.
Don't ask me why it would not charge with a clogged attachment, but so is the case.
I'm leaving now to go find myself....if I arrive before I get back, please ask me to wait!

TAC
Kibkommer
Kibkommer
Posts: 226
Joined: Sat 09 Sep 2017 1:24 pm

Re: Dyson V6 For Spares or Repair

  • Quote
  •   Message 3 of 12 in Discussion

Post by TAC »

To reset your Dyson battery, you’ll have to:

Unplug the charger from the wall.
Plug the charger back in again.
Connect the charger to the Dyson vacuum.
Pull the trigger and hold for 20 seconds, even though the vacuum doesn’t turn on.
Let go of the trigger. Remove the charger from the vacuum and continue using it like normal.
This combination of steps will reset the battery and get your Dyson vacuum running normally again.
I'm leaving now to go find myself....if I arrive before I get back, please ask me to wait!

User avatar
waddo
Kibkommer
Kibkommer
Posts: 4662
Joined: Sun 13 May 2012 7:21 am

Re: Dyson V6 For Spares or Repair

  • Quote
  •   Message 4 of 12 in Discussion

Post by waddo »

Thanks TAC, have tried all of the “fixes” but none of them work! Nothing wrong with the charger or it’s connecting lead, tested with my meter and power is there so it’s not that! When I replaced the old battery with the new one it worked for a few weeks then just stopped charging altogether! Guess it’s because I bought a cheap Chinese knock off battery and should have spent the extra £10 on a genuine one.

Wife was happy in the end as I ended up buying the Dyson 10 to replace her Dyson 8 which I then “inherited” to replace my Dyson 6! Still think that a new “Genuine” battery would solve the whole problem at around £20 off eBay. The V6 was real handy for all sorts of things and car cleaning as well.

Still available!

Having looked on eBay just it might be better to spend less than £20 and buy a complete working one - lol!
No matter how hard the past, you can always begin again.

ljarvo
Kibkommer
Kibkommer
Posts: 780
Joined: Sun 08 Jul 2012 7:31 pm

Re: Dyson V6 For Spares or Repair

  • Quote
  •   Message 5 of 12 in Discussion

Post by ljarvo »

Good morning Waddo,

Happy New Year

Do you have the soft roll head? As we need parts for ours?

Many thanks

Louise

User avatar
waddo
Kibkommer
Kibkommer
Posts: 4662
Joined: Sun 13 May 2012 7:21 am

Re: Dyson V6 For Spares or Repair

  • Quote
  •   Message 6 of 12 in Discussion

Post by waddo »

Sorry, the only head I have is the brush one. I can't remember a soft roll one either although the other two I have both have them - essential for dog hair - the other bits are the small brush thing and the long thin spout thing. But if any parts useful to you then you can have them, maybe just as spares???
No matter how hard the past, you can always begin again.

ljarvo
Kibkommer
Kibkommer
Posts: 780
Joined: Sun 08 Jul 2012 7:31 pm

Re: Dyson V6 For Spares or Repair

  • Quote
  •   Message 7 of 12 in Discussion

Post by ljarvo »

Thank you - do you have the Absolute or the Animal version?

I will take a picture of what we are looking for ….

User avatar
waddo
Kibkommer
Kibkommer
Posts: 4662
Joined: Sun 13 May 2012 7:21 am

Re: Dyson V6 For Spares or Repair

  • Quote
  •   Message 8 of 12 in Discussion

Post by waddo »

Sorry, it is an old model - basic - and is an SV03 according to the Dyson on-line help guy.
No matter how hard the past, you can always begin again.

ljarvo
Kibkommer
Kibkommer
Posts: 780
Joined: Sun 08 Jul 2012 7:31 pm

Re: Dyson V6 For Spares or Repair

  • Quote
  •   Message 9 of 12 in Discussion

Post by ljarvo »

We might be ok you never know!

Here is a picture of the head that we need parts for?

Ours is quite old as well.
Attachments
Dyson.jpg

User avatar
waddo
Kibkommer
Kibkommer
Posts: 4662
Joined: Sun 13 May 2012 7:21 am

Re: Dyson V6 For Spares or Repair

  • Quote
  •   Message 10 of 12 in Discussion

Post by waddo »

Not got that bit, ours is the brush one but if you are looking for the wheels that sit in the bottom then I understand they are a universal fit and the ones on ours are not in bad nick at all. You are welcome to the whole thing if you want, it's that or the bin I am afraid as nobody else wants to play with old kit these day - easier to buy a new one I guess but I just love making something out of nothing (no matter the cost) must be the Yorkshire in me - lol.
No matter how hard the past, you can always begin again.

ljarvo
Kibkommer
Kibkommer
Posts: 780
Joined: Sun 08 Jul 2012 7:31 pm

Re: Dyson V6 For Spares or Repair

  • Quote
  •   Message 11 of 12 in Discussion

Post by ljarvo »

Ok thank you it was worth a try ! But not the bit we need unfortunately.

Good idea though to try and reuse

Perks
Kibkommer
Kibkommer
Posts: 3
Joined: Fri 30 Sep 2022 10:04 am

Re: Dyson V6 For Spares or Repair

  • Quote
  •   Message 12 of 12 in Discussion

Post by Perks »

Would like it for spares please 05338325632

Post Reply

Return to “FREE - RECYCLE”