Can anyone help? Watching NTV via Multimax through a Mag250 box. Strangely now cannot get any of the viewable shows that can be watched on 'catch-up service' to load? Also find that often when switching stations say BBC to ITV or Sky it will not load and need to re-boot system! Also keep finding the oral and vision often run out-of-sync with a few moment delay between speech and picture? If it is a box problem where can I get it sorted?
thanks.
Multimax/NTV/Mag250
Moderators: Soner, Dragon, PoshinDevon
-
- Kibkommer
- Posts: 2365
- Joined: Sat 25 Oct 2014 10:33 am
Re: Multimax/NTV/Mag250
Hi minion,
There is a MAG update.
I've found this "how to" video for the previous update.
This should guide you to the latest update.
https://youtu.be/DoPKiQRFhek
This is how the update page looks on my MAG254...
Your device will automatically select the MAG250 update.
Press Red F1 button for your update.
There is a MAG update.
I've found this "how to" video for the previous update.
This should guide you to the latest update.
https://youtu.be/DoPKiQRFhek
This is how the update page looks on my MAG254...
Your device will automatically select the MAG250 update.
Press Red F1 button for your update.
-
- Kibkommer
- Posts: 2365
- Joined: Sat 25 Oct 2014 10:33 am
Re: Multimax/NTV/Mag250
MAG250/254 Manual update procedure...
Switch on MAG Box.
From TV tab, go/press left to settings.
Press OK.
Scroll down to...
Go to the inner portal.
Press OK
Do you want to go to the inner portal?
Press OK
Select Settings
Press OK
Select Software autoupdate
Press OK
Bottom left, you will see - F2 Update manually
Go to Remote Control
Press the GREEN F2 BUTTON
This will take you to Software update.
Check the Current version/Description/Date
Check the New version/Description/Date
If there is a New version
Go to Remote Control
Press the Red F1 button to update your device.
Follow onscreen instructions from now on.
If there are no updates available.
Press the HOME button several times to exit,
following any onscreen instructions.
Happy viewing.
Switch on MAG Box.
From TV tab, go/press left to settings.
Press OK.
Scroll down to...
Go to the inner portal.
Press OK
Do you want to go to the inner portal?
Press OK
Select Settings
Press OK
Select Software autoupdate
Press OK
Bottom left, you will see - F2 Update manually
Go to Remote Control
Press the GREEN F2 BUTTON
This will take you to Software update.
Check the Current version/Description/Date
Check the New version/Description/Date
If there is a New version
Go to Remote Control
Press the Red F1 button to update your device.
Follow onscreen instructions from now on.
If there are no updates available.
Press the HOME button several times to exit,
following any onscreen instructions.
Happy viewing.
-
- Kibkommer
- Posts: 22
- Joined: Sun 09 Aug 2015 8:13 am
Re: Multimax/NTV/Mag250
thanks for help... all system go now.... thank you from one who still lives in the stone age re tectno stuff!
-
- Kibkommer
- Posts: 2365
- Joined: Sat 25 Oct 2014 10:33 am
Re: Multimax/NTV/Mag250
Latest MAG254/256 UPDATE,
Install instructions above.
Install instructions above.
-
- Kibkommer
- Posts: 2365
- Joined: Sat 25 Oct 2014 10:33 am
Re: Multimax/NTV/Mag250
Update covers following boxes...
Firmware 0.2.18-r17 update for MAG 250/254/270/275
Published on 24/02/2017
The Infomir Company released a firmware updated for its products -
MAG245/250, MAG254/255, MAG270, MAG275.
Full details...
http://www.infomir.eu/eng/press-center/ ... 0.2.18-r17
Firmware 0.2.18-r17 update for MAG 250/254/270/275
Published on 24/02/2017
The Infomir Company released a firmware updated for its products -
MAG245/250, MAG254/255, MAG270, MAG275.
Full details...
http://www.infomir.eu/eng/press-center/ ... 0.2.18-r17